Filter
Top Products
Embroidery
%
Top thread tension
control 2 to 6
No presser
foot
Set the Machine
Stitch width
controL 1 to 5
t 7_13_4
Stitch length control
Any number (not
necessary to adjust)
Stretch Stitch
Drop feed lever
Here's How
1. Drop the feed dogs (see page 32).
2. Remove foot holder (see page 11).
3. Adjust the stitch width as desired
(see page 24).
4. Draw the design on to the fabric with
tailor's chalk.
5. Stretch the fabric between embroidery
hoops and place under the needle.
6. Lower the presser foot lever to
engaged the top thread tension.
7. Holding the top thread in your left
hand, rotate the hand wheel toward
you one complete turn.
Pull the top thread to draw the bobbin
thread through to the surface of the
fabric.
8. Using a medium speed, stitch along the
marked outline, guiding the fabric
carefully by hand.
9. When finished embrodiering, raise the
feed dogs (see page 32).
39