Filter
Top Products
• To Remove the Bobbin from the Machine
[
(_) Remove
sliding the hook cover plate
release button to the right.
the cover Plate by (_ Take out the bobbin.
• Horizontal Spool Pin
[
Ordinary Spool
Small Spool
Tilt up the spool pin. Place the spool of
thread on the spool pin with the thread
coming off the spool as shown.
Attach the large spool holder pressing it
firmly against the thread spool.
• The small spool holder is used with
narrow or small thread spools.
• Additional Spool Pin
I
I
J
The additional spool pin is used to wind
extra bobbins without unthreading the
machine.
To use, insert the additional spool pin in the
hole. Place the felt and the spool on the pin.
16