Filter
Top Products
2. a.
b,
c.
(Optional Item)
guide plate
plate
!
Guide s!ot /
Guide block
I Setting Mark
/ Gear
e plate
When you have selected the template with the size and style button-
hole you need, slide the template into the guide plate.
Pull catch toward you while sliding the template until the button-
hole size you have thorn is at the setting mark.
Insert gear of base plate into slot of template and fit guide block
into the center of the guide slot.
3. a.
b.
C°
d.
(Optional Item)
Top !Buttonhole foot
thread /
Bobbin
thread
Gear_lll tl!_Sl°t
\
Starting
point
J
Attach the buttonhole foot.
Adjust position of gear so it is aligned with the starting point of
template.
The lever c_ be used to cha_-_je gear position.
Pull the bobbin thread up through guide slot by turning the hand wheel
toward you while holding top thread.
Place the bobbin and top threads to the left side of guide plate.
Leave 3 to 4 inches of thread.
59