Filter
Top Products
Sew a Button
Set the Machine
Top thread tension
control 2 to 6
Stitch width control
Must beadjusted
t 213 4
A: Zigzag foot
l,
Stitch length control
Any number (not
necessary to adjust)
0L\ ))"
Stretch Stitch
Drop feed lever -_
f
/
Drop the feed dogs (see page 32).
1.
/
/
x. j
Match the center of the button holes to the center of the slot on the presser
foot.
2.
3.
Adjust the stitch width so that needle will drop in each hole.
Lower the foot to hold the button in place.
Turn the hand wheel by hand _v_ that needle ,,,:it,,,,,enter either ,,o,__"_ v,_ *_'_,,_
button.
4. Stitch several times.
J
\
To strengthen the shank, cut the
threads leaving a 8" tail. Bring the
needle thread down through the hole
in the button and wind it around the
shank.
Draw the thread to the bottom side
and knot.
When finished, raise the feed dogs
(see page 32).
]
4O