Filter
Top Products
CONDITIONS
All Sea-Fire products are tested after manufacture and shipped in perfect working order.
Damage noted upon receipt of shipment should be addressed as a shipping claim, the filing
of which is the sole responsibility of the consignee for which the total compensatory award
will be limited to that appropriated by the carrier. Insured freight costs are the responsibility of
the consignee. Missing component parts and damage noted upon installation are typically
the result of mishandling during the installation process and will not qualify for warranty
coverage. Incidents of accidental discharge are not indicative of product failure — heed
product warnings to avoid injury and/or associated costs. No returns will be processed
without proper return authorization.
OUT OF WARRANTY REPLACEMENTS/RECHARGES
SEA-FIRE “FT” Model Series cylinders comply with DOT Specification 39. These cylinders
are not refillable. The discharged cylinder will be replaced with comparable Sea-Fire extin-
guisher upon prepaid return of the discharged system for one-half of the current suggested
list price.
RETURN TO:
UNITED STATES EUROPE
SEA-FIRE MARINE SEA-FIRE EUROPE LTD
Division of Metalcraft Inc. Unit 7. io Centre. Stephenson Road
9331-A Philadelphia Road Fareham, Hampshire
Baltimore, Maryland 21237 USA PO15 5RU, United Kingdom
Website: www.sea-fire.com
EQUIPMENT LIST FOR INSTALLATION
1. Drill motor.
2. Drill bit - 25/64" (.390") for rubber grommet.
3. Drill bit -1/8" (.125") for tie down clips.
4. Drill bit - 1/4" (.250") for bracket mounting.
5. Drill bit - 5/16" (.312") for light kit.
6. Screw driver - Standard (flat) for opening valve.
7. Screw driver - Phillips (cross point) for tie down clip screws.
8. Wire - 16 AWG, for wiring light kit.
9. Fuse - 5 amp inline, for light kit.
10. Torque wrench - 0-100 inch lbs.
11. Wrench - 12mm
MODEL FT PARTS LIST
1. Cylinder Assembly - Reference Specification Table for application.
Model # Part #
FT-25 130-058
FT-50 130-059
FT-75 130-060
FT-100 130-061
FT-125 130-062
FT-150 130-063
2. Tube Kit - Reference Specification Table for application.
10' Tube kit part # 130-121
15' Tube kit part # 130-122
3. Tube Parts Kit - FT Kit part # 130-114
4. Light Kit - 12 Standard Light Kit part # 130-117
5. Bracket Assembly Model # Bracket Part #
FT-25 122-010
FT-50 122-010
FT-75 122-010
FT-100 130-011
FT-125 130-012
FT-150 130-013
9