Filter
Top Products
6
SELECT INSTALLATION LOCATION
CAUTION
：
The air conditioning unit must be installed by professional
technicians.
BASIC REQUIREMENTS FOR INSTALLATION POSITION
Installation of Either unit in the following locations may cause malfunction.
Locations exposed to:
Machine oil
Flammable or corrosive gasses
High frequency waves (i.e. from radio equipment, medical equipment, etc.)
INDOOR UNIT LOCATION
Intake and outlet should not be obstructed.
The wall the unit is to be mounted on should allow for a clear hole for the condensation drain and
the refrigeration lines.
The wall the unit is mounted on should be strong enough to bear the weight and vibration of the
unit.
Allow for proper clearances around the unit - see installation dimension diagram.
Location should allow easy access for maintenance and removal of air filter.
Position unit and remote control at least 3 feet from electric appliances such as televisions, radios,
etc.
Keep unit and remote out of direct sunlight and/or florescent lighting and away from any excessive
heat source, steam, or flammable materials.
OUTDOOR UNIT LOCATION
Allow sufficient ventilation around the unit - see installation dimension diagram.
The air intake and outlet should not be obstructed.
Position unit so that noise and outlet airflow will not inconvenience neighbors.
Position unit on a solid foundation. Location should be able to withstand the full weight and
vibration of the unit.
Installation should not be performed in the following locations exposed to: machine oil, flammable
or corrosive gases, high - frequency waves (i.e. from radio equipment, medical equipment, etc.)
Installation location should beyond the reach of children.