Filter
Top Products
TERMS & CONDITIONS
•
Hardware Finishes
Price Book 70A
Effective July 28, 2008
Terms-16
Hardware Finishes:
Schlage Loc
k finishes are durable, top quality finishes obtained by the careful processing of solid brass, bronze, stainless steel or
other materials. Where required, a protective clear coating is applied and cured under high temperature. It is important that climatic
conditions and usage be taken under consideration when selecting finishes. This is especially true in areas subjected to strong
corrosive vapors, humid climate or sea air which, in a short time, may have a damaging effect on metal finishes. The longevity and
preservation of the finish appearance is determined by base metal and finishing process. Clear protective coating or other organic
finishing applications may require different methods of cleaning and care. As an example, non-clear coated finishes should not be
cleaned with soaps or any solvents; organically coated surfaces should periodically be cleaned with a mild, nonabrasive soap and
buffed lightly with a clean cloth. The type of base metal and finishing techniques must be considered when applying any cleaning
or preservative method. Contact the Schlage Technical Services Department for further information on the care of finished hardware.
In some instances, for customer convenience, the most appropriate BHMA finish symbols are used to indicate similarity of appearance,
regardless of base metal of finishing process. A, AL, D, ND, F, FA, H, S, S200-Series and Dexter by Schlage levers are zinc-based material
and are plated to match finishes indicated. Finishes of latches, strikes, cylinders/cores, and visible mounting screws, though similar in
appearance, may differ from the finish of the trim. Finish numbers in the 600-Series are the BHMA (Builders Hardware Manufacturers
Association) industry standard.
Finish Codes and Descriptions:
The nearest old U.S. equi
valent code designations are shown in parenthesis ( ).
Symbol Description
505 Bright Brass
605 (3) BRIGHT BRASS, Clear Coated
606 (4) SATIN BRASS, Clear Coated
609 (5) ANTIQUE BRASS, Satin Brass, Blackened,
Satin Relieved, Clear Coated
610 (7) BRIGHT BRASS, Blackened,
Bright Relieved, Clear Coated
611 (9) BRIGHT BRONZE, Clear Coated
612 (10) SATIN BRONZE, Clear Coated
613* (10B) OIL RUBBED BRONZE, Oxidized Satin
Bronze, Oil Rubbed, No Coating
616 (11) ANTIQUE BRONZE, Satin Bronze, Blackened,
Satin Relieved, Clear Coated
619 (15) SATIN NICKEL, Satin Nickel Plated,
Clear Coated
*
Oil rubbed bronze (613) is considered a category “B” finish by ANSI/BHMA and will vary in color when applied to different alloys
and forms of base material. 613 will also vary from production lot and additionally from one manufacturer to another. Oil rubbed
bronze will wear off over time due to the “rubbed” finishing method that has no protective coating or plating.
Standard Finishes:
Refer to each lock series section for standard finish availability. Standard finish availability varies depending on the function, design and
options ordered. Ref
erence Non-Standard Finishes in each lock series section for availability of additional non-standard finishes.
Non-Standard Finishes:
Refer to Non-Standard F
inishes in each lock series section for non-standard finish availability. One $250.00 net non-standard finish
handling charge applies to each non-standard finish per order. The Schlage Lock Company reserves the right to refuse any order for
non-standard finishes without incurring any obligation. If the specific finish you require is not available as a standard or non-standard
finish, refer to the Custom Product Request Process on page iv.
Symbol Description
620 (15A) ANTIQUE PEWTER, Satin Nickel Plated, Blackened,
Satin Relie
ved, Clear Coated
622 MATTE BLACK, Coated
625 (26) BRIGHT CHROMIUM PLATED, No Coating
626 (26D) SATIN CHROMIUM PLATED, No Coating
629 (32) BRIGHT STAINLESS STEEL, No Coating
630 (32D) SATIN STAINLESS STEEL, No Coating
716 AGED BRONZE, Clear Coated