Sanyo SAP-KRV123EH Air Conditioner User Manual


 
12
Operation with the Remote Control
Unit
1. Automatic Operation
This unit automatically switches between cooling operation and heating
operation according to the difference between the room temperature and the
temperature setting.
Check that the circuit breaker on the power panel is turned on.
Once mode is selected and the unit is preset by following the steps below,
you can have the air conditioner automatically bring the room to the desired
temperature simply by pressing the ON/OFF operation button.
STEP 1 Press the MODE selector button to .
STEP 2 Press the ON/OFF operation button.
To stop the air conditioner, press the ON/OFF operation button again.
To change the temperature setting; press the temperature setting buttons
and change the setting to the desired temperature.
STEP 2
STEP 1
NOTE
NOTE
OI-671-12-EG
01_SAP-KRV93EH_EN.fm Page 12 Thursday, February 12, 2004 12:10 PM