Filter
Top Products
6_ Product Introduction
product introduction
AT A GLANCE
Front/Rear
1
LED
Displays the status of the system operation.
2
Keypad
Used to enter the ID/password.
3
2-PIN Connector
Can be connected to the power cable.
4
6-PIN Connector
Can be connected to Wiegand, RS-232 communication cables.
5
8-PIN Connector
Connected to the tamper, LED and buzzer control connection cables.
6
Output Selection Switch
Switch that allows you to select an output from 8 bit, 4 bit Burst and Wiegand.
7
Tamper Switch
Tamper switch.
8
Fixing Screw
Screws for fi xing the devices.
X Y Z
[ \ ]
^ _ `
lzj lu{
W
zzhTyYWWX
347
8
56