Filter
Top Products
Installation
Extend the window filler panels.
10-1 When the window is pulled down, the window should rest on the
cabinet just behind the window filler panel frames.
10-2 Slide the filler panels outward until they touch the sides of the window.
Secure the panels by putting four Type A screws through the mounting
holes in the panels and driving them into the window stool and sash.
10
Slide the air conditioner into the cabinet.
11-1 Carefully slide the air conditioner back into the cabinet.
11-2 Reinstall the air conditioner-to-cabinet retaining screws removed
in page 14.
11
Reinstall the grille.
Refer to page 14.
13
Install the window gasket.
Cut the window gasket to the window width and stuff it between the
window and the glass to prevent air and insects from getting into the room.
12
Check for air leaks.
Some installations may require additional sealing around the window and
air conditioner. Check for air leaks and seal.
14
Screw
Screw
E-16