Filter
Top Products
E-15
Attach the seal strip to the window.
8-1 Cut the adhesive-backed foam seal strip to the window width.
8-2 Remove the backing from the seal strip and attach the strip to the
underside of the bottom window.
8
Attach the window filler panels to the cabinet.
6-1 Install the top "L" shaped cannel with three Type B screws provided.
6-2 Slide the window filler panels and their frames into the channels on the
top and bottom of the cabinet and assemble them to the cabinet using
six Type B screws.
6
Install the cabinet in the window.
9-1 Place the cabinet into the window with the frame on the top of the
cabinet positioned just in front of the bottom window.
Pull the window down until it rests on the cabinet just behind the top
channel of the frame on the top of the cabinet.
9-2 Locate three screw holes along the cabinet bottom front edge.
Center the cabinet, side to side, in the window and mount it to the
window stool using three Type A screws.
9
Attach the support brackets to the cabinet.
7-1 Select the Type D support bracket position that will place the bracket
near the outermost point on the window sill. In most cabinets this will
be the first set of holes. Using eight Type B screws, attach the
support brackets to each side of the cabinet bottom.
7-2 Thread the Type C bolts into the support brackets, making sure the
cabinet maintains a slightly downward slant to the outside.
A 1/4" slant, from the cabinet front to the rear, is necessary.
Use the level to determine the slant.
7
Top Channel
Type C Bolts
Type B
Screws
Top
Channel