Filter
Top Products
Installation
Window installation
Tools needed
◆
Philips head screw driver
◆
Adjustable wrench
◆
Scissors
◆
Ruler or tape measure
◆
Pencil
◆
Leveler
1
Parts furnished
Hold the handle of the air filter, pull it slightly forward,
and then pull it out to the right side.
2
Remove the screw.
4
Remove two screws on the lower, right and left sides of the unit.
5
Remove the chassis from the cabinet.
3
Disassemble the front grille.
3-1 Hold the lower part of the front grille, and then move it slightly to
the left side.
3-2 Pull the lower part of the front grille slightly forward. (below three inches)
3-3 Lift the front grille upward.
Type A Type B Type C Type D
Qty-7
Adhesive seal strip
Window gasket
Top channel
Qty-17 Qty-2 Qty-2
Applying excessive force to disassemble the front grille
may cause damage to the tab ; be sure not to use
excessive force.
☛
E-14
Screw
Front grille