Filter
Top Products
Internet Camera RXS-3323/RXS-4324 User Manual
Appendix A: Restore Factory Default Settings
There is a button hidden in the pinhole near to the RJ-45 connector. This button is used to restore
the all factory default settings. Sometimes restarting the device will make the system back to a
normal state. However, if the system still got problems after restart, user can restore the factory
default settings and install it again.
Restore the device:
1. Insert the paper clip or other suitable tool to press and hold the button down continuously.
2. Hold it at least 5 seconds and release the tool. Then the device has been restored to default
settings and reboot again.
Note: Restoring the factory default setting will lose the all previous settings included IP address
forever. User needs to run the IPWizard II program to search the device and configure it to let the
device work properly again.
59