Filter
Top Products
Introduction
Introduction
This manual provides the information needed to operate the AutoPrinter and identify the parts. To
setup and install your AutoPrinter, refer to the Setup and Installation Guide included with your
product.
Note: The term AutoPrinter applies to both the AutoEverest and the AutoPrism. AutoEverest
and AutoPrism will be used only to refer to either AutoPrinter specifically.
AutoEverest AutoPrism
Operating system requirements
AutoEverest
Windows-based PC
The AutoEverest will run only on Windows 2000 Professional with SP4, Windows XP Professional
with SP1 or SP2, and Windows Server 2003.
Macintosh
The AutoEverest will run only on Macintosh OS X v10.3/10.4.
AutoPrism
The AutoPrism will run only on Windows 2000 Professional with SP4, Windows XP Professional
with SP1 or SP2, and Windows Server 2003.
Media requirements
Refer to your Everest Printer User Guide or PrismPlus! Printer User Guide for the correct media
requirements.
Ribbon requirements
Refer to your Everest Printer User Guide or PrismPlus! Printer User Guide for the correct printer
ribbons.
Label design requirements
Refer to your Everest Printer User Guide or PrismPlus! Printer User Guide for label design
requirements.
110656_H 1