If an error code 8 is observed while performing the testing, complete the
following:
1. Confirm that the gas valve is not in the REMOTE mode.
• If the valve is producing error code 8 while in the REMOTE
mode, the valve is defective and should be replaced.
• If the valve is producing error code 8 while in the LOCAL mode,
go to the next step.
2. Slide the REMOTE/LOCAL switch to REMOTE and program the
remote control as per item 6 page 13. The error code will clear itself after
approximately 1.5 minutes and return to normal operation.
Page 19 of 27