Potterton Solar - Solar Thermal Domestic Hot Water System12
3
.0 Commissioning of solar controller
3.1.5 Menu“Info”
In this menu mode all measured values and operating
s
tates are shown.
If the values are marked as “resettable”, they may be
reset in the following way:
Choose the value with buttons and
Reset value by means of the button
Message “OK?” confirm with = no or = yes
Indication Description Reset possible
75ºC Indication of current collector temperature no
min. 12ºC Indication of minimum collector temperature yes
Re-settable to current temperature
max. 105ºC Indication of maximum collector temperature yes
Re-settable to current temperature
52ºC Indication of current temperature storage tank (lower) no
min. 40ºC Indication of minimum temperature storage tank (lower) yes
Re-settable to current temperature
max. 67ºC Indication of maximum temperature storage tank (lower) yes
Re-settable to current temperature
25ºC Indication of universal temperature measuring points (T3) no
55ºC Indication of current temperature storage tank thermostat no
60ºC Indication of current temperature collector return no
60ºC Heating, cooling, temperature differential controller no
heat source. Sensor T1...T6
35ºC Temperature differential controller no
heat target
1234 h Operating hours for charging storage tank Yes
Resettable to 0 h
927 kWh Energy productivity for storage tank Yes
Resettable to 0 kWh