7.0 Mode Selection/Temp Adjustment
13
© Baxi Heating UK Ltd 2010
Temps / mode CH1
Time hot water
Holidays heating CH1
Day / month - -.- -
Start
Holidays heating CH1
Day / month - -.- -
End
Holidays heating CH1
HOLIDAY MODE
STEP 1 - Press the MENU button.
STEP 2 - Turn the Dial Knob to highlight
‘Holidays heating CH1’ and press the Dial
to select the start period.
STEP 3 - Press the Dial Knob and the
Day/month starts flashing, turn the Dial to
required month and press Dial to select
and then repeat to select the day.
STEP 4 - Turn the Dial Knob to highlight
‘End’ and press the Dial. The Day/month
starts flashing, turn the Dial to required
month and day as in STEP 3 to end the
holiday period.
7.6 Holiday mode
1. Holiday - When the holiday mode is activated the
‘protection’ mode is activated for the selected period see
section 7.1
2. The Holiday mode is activated by using the menu button
scroll down to ‘Holiday heating CH1’, press the dial
3. Press again to set the month scroll and select – (the display
will start at 01,01) set the day scroll and select. Scroll again to
‘Operating’ level, scroll between - protection and reduced -
select the mode required
7.7 Programme Lock
1. There is a programme lock function available to stop the
programmer being either tampered with or accidentally altered.
2. After the programme lock has been activate, only the
temporary setpoints, comfort, reduced temperature or the
functions via the easy menu such as standby/operation or HW
push are available for change by the user.
3. To activate the programme lock: -
a) Press the menu button to access ‘info’, then scroll and press
to choose ‘operator section’, scroll to the programme lock
option, press and scroll from ‘off’ to ‘on’. Confirm by pressing
the dial knob.
b) Accessing programme lines is now still possible but when
attempting to alter any parameters the screen will show
‘programme locked’.
4. To remove the programme lock: -
a) To temporarily unlock the programmer press the menu
button to access ‘info’ then press and hold the easy menu and
dial button until ‘programme temporarily unlocked’ appears.
b) In this state any alterations can be made until returning to the
standard screen when the programming lock is activated again.
c) To remove the programme lock permanently: - whilst
temporarily unlocked, access the programme lock screen as
described above, and press and scroll from ‘on’ to ‘off’. Confirm
by pressing the dial button.
Menu Button
Dial Knob
04. November 2008 08:50
Tuesday
Easy Menu
Button