Baxi Potterton 24/1.0 Boiler User Manual


 
7.0 Mode Selection/Temp Adjustment
11
© Baxi Heating UK Ltd 2010
7.1 Selecting the Cental Heating Mode
1. There are 4 central heating modes: -
On - heating operates to keep the dwelling at
the comfort set point chosen by the
householder continuously ie. 24hr/day,
initially set at 20°C.
Timed - heating operates to keep the dwelling at
the comfort set point chosen by the
householder according to the
programme times, initially set at 20°C
(min 10°C - max 35°C).
Reduced - heating operates to keep the dwelling at
the reduced set point chosen by the
householder continuously, initially set at
5°C (min 5°C - max 20°C).
Protection - heating operates to keep the dwelling
above 5°C continuously.
2. The central heating mode can be set using either the POU
on the appliance or the room unit PRU.
3. To select the mode required: - from the main screen press
the menu button.
4. Turn Dial to ‘Temps / mode CH1’.
Press dial to select and scroll between: - Protection – Timed –
Reduced – On, press dial to select.
7.2 Further Information
1. The user must be aware that in the automatic mode the
programmer is not inactive in between the programmed times,
the frost protection/reduced temperature period is constantly in
the background and will cause the appliance to come on if the
room temperature falls below the reduced temperature
setpoint (5° default) or 5°C during frost protection.
NOTE: Adjustment of the room temperature during these
periods will result in a temporary change to the reduced
temperature setting until the next comfort period is
activated.
2. The central heating may be switched on at any time by
increasing the room temperature setpoint to a greater value
than the indicated room temperature whether in or out of a
programmed period. This setpoint change will remain active
until the next programmed comfort period when the setpoint
will revert to the permanent comfort setpoint.
Temps / mode hot water
Holidays heating CH1
Temps / mode CH1
Turn the Dial Knob clockwise to
highlight ‘Temps / mode CH1’.
Menu Button
Dial Knob
04. November 2008 08:50
Tuesday
Easy Menu
Button
On
Operating mode
Temps / mode CH1
04. November 2008 08:50
Tuesday
Set time and date
---------------------------------------------------
Information
The basic display is shown.
If the basic display is not
showing, press the MENU
button. until the
basic display is shown
Press the MENU button.
Press the Dial Knob twice and
then turn the Dial Knob to the
required space heating mode i.e.
On or Timed or Reduced or
Protection. Press the Dial Knob
to select.
STEP 4 - For this example choose Comfort
18.0 °C
Room temperature CH1
Temps / mode CH1
Turn the Dial Knob until ‘Room
temperature CH1’ is displayed.
Press the Dial Knob and the °C
will flash, turn the Dial to set the
required °C and then press the
Dial Knob to select..
STEP 5
STEP 3
STEP 2
STEP 1
10.0 °C
Reduced setpoint
Temps / mode CH1
The Process for setting the
Reduced setpoint is the same.
When STEP 4 is reached
choose Reduced and then
continue with STEP 5 but turn
Dial to ‘Reduced setpoint’.
STEP 6