Filter
Top Products
Air purication combined with air humidication
When you set the appliance to air purication combined with air
humidication, the appliance cleans the air and humidies it at the same
time.
Note: Make sure the water bucket is lled with water when you want to use
the air humidcation function (see chapter ‘Before rst use’).
Setting the desired air humidity
You can set the desired humidity. When the humidity of the room reaches
the desired level, the humidication function switches off automatically.
1 Tosetthedesiredairhumidity,presstheHUMIDITYSETbuttonone
or more times.
, The corresponding HUMIDITY SET light goes on.
Note: When you have set the desired air humidity, you can also set the fan
speed, SILENT mode, BOOST POWER mode or AUTO mode as described
above.
Water level
- The water level in the water bucket is visible through the water
level window on the side of the appliance.
- When there is not enough water in the water tank, the red REFILL
WATER light ashes to indicate that you have to rell the water bucket.
Humidity indication
- The appliance is equipped with a built-in humidity sensor. The current
humidity is shown by the CURRENT HUMIDITY lights.
Note: The accuracy of the humidity indication is approximately plus or minus
5%.
Note: The humidity sensor in the appliance is not a regular hygrometer.
Therefore it may take some time for it to sense change in the humidity level
and to indicate the actual ambient humidity level.
ENGLISH20