Filter
Top Products
5
Understanding the Application of the
Screen
Is there enough Mounting Surface for the Unseen?
The screen installs on the outside surface of the door trim (brick mold).
A minumum of 11/16" (17 mm) is required. See Mounting Surface as
indicated in diagram .
Is the Door Opening Square?
For the screen to operate effectively, the door opening must be perfectly
square. Using a Carpenter Square, check to ensure that the door frame
or mounting surface is square. If not, use shims to bring the door frame or
mounting surface to square before beginning installation. If shimming the
door frame or mounting surface is not possible, apply shims beneath the
screen components to ensure a plumb, level and square installation.
Is this screen being installed on a Right Hinged Door?
Finally, make sure the correct model has been purchased! The screen in
this package is congured for a “RIGHT” hinged door. The hinges should
be on the right side and the door knob should be on the left. This screen is
designed to be installed on in-swing doors only. This requires the screen
to be installed on the outside of the building.
INSTALL ON
BRICKMOLD,
hinge side
Door
Frame
Door
Door Hinge
Door Knob
A
Top View of Door Frame
A