Filter
Top Products
11
Cutting the
Top and Bottom
Rails
NOTE: Top Rail is clearly labeled with CUT and NO CUT zones.
1. Remove the End Caps from both sides of the Top Rail .
2. Using the "Length to be Cut" dimension for Top Rail calculated on
Page 10, carefully measure and mark the rail on all sides to ensure an
even cut.
3. Cut straight through Top Rail .
Cutting the Bottom Rail
NOTE: Low and High Bottom Rails and are clearly labeled with CUT
and NO CUT zones.
1. Select the Bottom Rail chosen on Page 9.
2. Using the same "Length to be Cut"
dimension for Top Rail , carefully
measure and mark the Bottom Rail
on all sides to ensure an even cut.
3. Cut straight through Bottom Rail or .
NOTE: After cutting any part of the screen,
use a le to remove any burrs from the
surfaces.
DO NOT
cut this end.
Cut this end
Door opening
Cut this portion
Cut this portion
OR
2
2
2
2
2
3 4
3
4
3
4
2