Filter
Top Products
13
Cut only from bottom as
indicated by hack saw
illustration.
Important
Cut this
portion
Cutting the
Screen Housing
I
Lower Housing Assembly
Side Bar Cushion
Side Bar
Side Bar
Side Bar Cushion
Ensure that the SIDE
BAR CUSHION is
pushed completely in
place.
Inner Handle
Bottom Rail Guide
Washer
Side Bar
Cushion
Side Bar
K
J
4. Carefully measure and mark the Screen Housing on all sides using the
"Length to be Cut" dimension for Screen Housing calculated on
Page 10.
5. Cut straight through Screen Housing and the berglass mesh.
6. Replace the Side Bar Cushion onto the Side Bar, ensuring that it is
pushed in as far as it will go.
7. Slide the Bottom Rail Guide back onto Screen Housing and reattach
the Lower Housing Assembly and Washer using the two screws.
I
J
K
1
1
1
1
1
Do not remove blue
tape until installation
is complete.