Filter
Top Products
15
Installing the
Top Rail
The top edge of the Top Rail will be mounted exactly 5/8" (16 mm) from
the bottom edge of the exterior top trim or door frame.
1. Make a mark 5/8" (16 mm) up from the bottom edge of the exterior trim
or door frame. Using a level, extend the mark across the surface. This
mark will be the reference point for the top edge of the Top Rail .
2. Apply the Protective Sticker to back edge of Top Rail on the
right side.
3. Remove the backing on the adhesive strip and position Top Rail
along the guide line.
4. Secure Top Rail using the Wood Screws provided.
Protective Sticker must be
applied half way to the back
edge of and then fold the
other half over after cutting
has been completed.
Backing of Adhesive Strip
Mounting Surface
Protective
Sticker
5/8"
(16 mm)
2
2
2
2
2
2
2
8
8
8