![](http://pdfasset.owneriq.net/b/8c/b8c9b01f-3420-4f5d-8abc-c4827e400bd4/b8c9b01f-3420-4f5d-8abc-c4827e400bd4-bg38.png)
Adjustment
56
1.07.02 Coupling for roller presser drive
Requirement
1. When the roller foot is touching the feed wheel and the magnets are extended, the
top coupling half 1 should be touching the bottom coupling half.
2. There must be a distance of 3 mm between coupling half 1 and locking disc 3 of the
drive mechanism.
● Adjust coupling half 1 (screw 2) according to the requirement.
Fig. 1 - 47
2
3
1
3 mm