![](http://pdfasset.owneriq.net/b/8c/b8c9b01f-3420-4f5d-8abc-c4827e400bd4/b8c9b01f-3420-4f5d-8abc-c4827e400bd4-bg18.png)
Adjustment
24
1.04.15 Stitch length scale disk
Requirement
When the stitch length control device is engaged and the stitch length is set at “0”, the
marking line on scale disk 1 should be positioned opposite the lower edge 3 of the guard
belt opening.
● Set stitch length "0".
● Turn stitch length control device 1 (screws 2) according to the requirement.
Fig. 1 - 15
1
3
61-038
2