Filter
Top Products
Adjustment
14
1.04.06 Needle rise, hook clearance, needle height and needle guard (on the PFAFF 591)
Requirement
With the needle bar positioned 2,4 mm after BDC
1. the hook point must be at needle centre with a hook-to-needle clearance of
0.05 to 0.1 mm;
2. the top of the needle eye must be 0.8 to 1.0 mm below the hook point;
3. the needle guard 6 must touch the needle lightly.
Fig. 1 - 06
6
9
4
5
5
0,8 - 1 mm
61-028
1
4
3
7
8
2
129-051
● Set stitch length at "0.8".
● Loosen screws 1, 2, 3, 4 and 5.
● Bring needle bar to 2.4 mm past BDC: