Filter
Top Products
Input
39
6.02.02 Example of a seam program input using the "teach-in" function
The program to be created should
- have 3 seam sections and
- be stored under the program number "11 " with the comment "TEACH".
Switch on the machine. ●
Call up the input mode. ●
Call up the "teach-in" function and enter program number " ● 11 ".
Set the seam type (right seam) by pressing until the appropriate symbol appears. ●
Call up the menu for comment input. ●
Enter the comment "TEACH" with the keyboard and number panel. ●
Conclude the comment input. ●
Change to the input of the fi rst seam section. ●
Seam area 1
Learn number of stitches
Fullness: 0
Seam area 2
End with knee switch
Fullness: 30
Seam area 3
Without stitch count
End with pedal position "-2"
Fullness: 0