Filter
Top Products
Input
36
6.02 Examples of how to create a seam program
6
.02.01 Example of a seam program input with the "creating/adjusting a program"
function
The program to be created should
- have 3 seam sections and
- be stored under the program number "4" with the comment "PROG".
Switch on the machine. ●
Call up the input mode. ●
Call up the "creating/adjusting a seam program" function and enter program number " ● 4".
Set the seam type (right seam) by pressing until the appropriate symbol appears. ●
Call up the menu for comment input. ●
Enter the comment "PROG" with the keyboard and number panel. ●
Conclude the comment input. ●
Change to the input of the fi rst seam section. ●
Seam area 1
Number of stitches: 40
Fullness: 0
Seam area 2
End with knee switch
Fullness: 20
Seam area 3
Without stitch count
End with pedal position "-2"
Fullness: 0