Filter
Top Products
Setting up
27
Fig. 9 - 04
Fig. 9 -03
1
2
Switch the machine off!
Danger due to unintentional
starting of the machine!
Removing the bobbin case:
● Open the bed slide.
● Raise latch 1 and remove bobbin
case 2.
Inserting the bobbin case.
● Insert bobbin case 2 so that it clicks into
place.
● Close latch 1 and close the bed slide.
Do not operate the machine when the hook compartment cover is open!
Danger of injury from moving parts!
9.04 Threading the bobbin thread and regulating the bobbin thread tension
Switch the machine off!
Danger due to unintentional
starting of the machine!
● Thread the bobbin as shown in Fig. 9-04.
● When the thread is pulled, the bobbin
must rotate as shown by the arrow.
● Regulate the bobbin thread tension on
srew 1.
9.03 Removing/Threading the bobbin case