Filter
Top Products
Installation and commissioning
22
1
2
8
.01.06 Fitting the tilt lock
Switch off the machine!
Danger of injury due to uninten-
tional starting of the machine!
● Screw on tilt lock 1, provided in the ac-
cessories, using screw 2.
Do not operate the machine
without tilt lock 1!
Danger of crushing between
sewing head and table top!.
teil und Tischplatte!
Fig. 8 -06
8.01.07 Fitting the reel stand
● Fit the reel stand as shown in Fig. 8 - 07.
● Afterwards insert the stand in the hole in
the table top and secure it with nuts pro-
vided.
Fig. 8 - 07