Filter
Top Products
Installation and commissioning
21
Fig. 8 - 04
8.01.04 Mounting the upper V-belt guard
If a large balance wheel is
used, the corner 1 of the belt
guard 2 must be broken out.
● Attach belt guard section 2.
● Attach belt guard section 3.
Fig. 8 - 05
8.01.05 Mounting the bottom V-belt guard
● Adjust bottom -V-belt guard 1 so that the
motor pulley and V-belt run freely.
Please note the instructions
in the operating manual of
the drive.
1
2
3
1