Filter
Top Products
Index
Contents ..................................................................................Page
4
1.07.02 Lateral alignment of the thread catcher ...............................................................................35
1.07.03 Knife position .......................................................................................................................36
1.07.04 Front point of reversal of the thread catcher ........................................................................37
1.07.05 Manual trimming check ........................................................................................................38
1.07.06 Needle thread tension release .............................................................................................39
1.07.07 Readjusting the control cam ................................................................................................40
1.08 Adjusting the automatic presser foot lift -910/06 ................................................................41
1.09 Adjusting the back-tacking mechanism –911/37 ..................................................................42
1.10 Basic position of the machine drive unit .............................................................................43
1.10.01 On machines with EcoDrive and control unit P40 ED .........................................................43
1.10.02 On machines with PicoDrive and control unit P40 PD2 .......................................................43
1.10.03 On machines with control unit MD-4-95-220-CE .................................................................44