Filter
Top Products
Adjustment
44
1.10.03 On machines with control unit MD-4-95-220-CE
● Press and hold button and switch on machine.
● Parameter 47 is displayed.
● Call up input level.
● Set Code " 62" from the machine manufacturer.
● Confi rm entry and switch off machine.
● Press and hold button and switch on machine.
● P
arameter 208 is displayed.
● Call up parameter
236.
● Confi rm entry
.
● Set value from the machine typ (0 = PFAFF 1183, 1 = PFAFF 1181).
● Confi rm entry and switch off machine.
● Press and hold button and switch on machine.
● Parameter 176 is displayed.
● Call up parameter 192.
● Press button D+ to turn function "on".
● Call up parameter 18
1.
● Call up input lev
el.
● Sew a stitch with the pedal function.
● Turn the handwheel in rotational direction until the needle point (approaching from above)
is on the upper edge of the needle plate.
● Confi rm entry.
● Call up parameter 192.
● Press button D+ to turn function "off".
● Press button "S" to exit input.
● .By pressing the cor
responding +/- key, select parameter "700"
● Sew a stitch by operating the pedal.
● Turn the balance wheel in the sewing direction until the descending needle is level with
the top edge of the needle plate.
● Conclude the adjustment of the sewing motor by pressing the "scroll" key
P
S
S
AB
A
S
S
C
D
AB
D
C
D
AB
C
D
AB
D
S
S