Filter
Top Products
Adjustment
31
1.06.04 Cutting angle of the knife
Requirement
The knife should be
1. Touching the stationary knife 6 without counter pressure and
2. Be at a 0.1 mm slant to the stationary knife 6.
● Loosen screws 1.
● Adjust eccentric 2 (screw 3) in accordance with the requirements.
● Tighten screws 1.
Make sure that knife guide 4 is moving smoothly!
Fig. 1- 26
1
3
2
4
0,1 mm
5
6