Filter
Top Products
Pelco Manual C459M-E (1/96) 9
5.0 CARE AND MAINTENANCE
Maintenance performed at regularly scheduled inter-
vals will help prolong the operational life and appear-
ance of the equipment.
1. Clean the window with a mild nonabrasive deter-
gent in water and a soft cloth regularly to help main-
tain picture clarity.
2. Clean or replace the fiberglass filter pad in the chin
of the enclosure periodically. To replace or clean
the filter pad, perform the following steps:
6.0 WW6500 EXPLODED ASSEMBLY DIAGRAM
Figure 8. WW6500 Exploded View Assembly Diagram
a. Remove the two Phillips head screw and pull
the filter assembly out of the enclosure for ac-
cess to the filter.
b. Remove the wire screen and filter pad. Clean
the pad with water and mild detergent, dry
thoroughly, and reinsert or replace with a new
pad. (Replacement pads, part number
EH550010045, are available from Pelco.)
NOTE: FIGURE DOES NOT REPRESENT
CURRENT PUMP STYLE.