Filter
Top Products
10 C3407M-D (1/07)
Camera Module
The ICS150-CW Series Camclosure camera module includes the camera, camera bracket, and heater
board. To perform most camera adjustments, you must remove the module from the back box.
Use the following instructions to remove and reinstall the camera module.
MODULE REMOVAL
To remove the camera module from the back box:
1. Gently squeeze the bracket and pull the module out of the back box (refer to Figure 5).
Figure 5.
Camera Module Bracket
WARNING:
Heater elements could be hot! When camera power is on, use caution when
adjusting the camera. This applies to all models.
BRACKET