Filter
Top Products
6 of 11
ISSUED: 09-05-06 SHEET #: 202-9166-7 11-10-08
Insert two 1/4-20 x 12 mm screws (L) into screen
mount bracket (A), leaving 1/8" of exposed thread as
shown in figure 9 and detail 3.
Loosely attach six 1/4-20 x 12 mm screws (L),
washers (O), and 1/4-20 nuts (N) to screen mount
bracket (A).
6
L
O
A
N
7
Slide screen mount bracket (A) onto upright (H) so that
1/4-20 nuts (N) slide into slots of upright (H) as shown
in figure 7 and detail 2. Slide screen mount bracket to
desired position, level, then tighten 1/4-20 x 12 mm
screws (L) using 4 mm allen wrench (R).
A
H
SLOT
fig. 7
L
8
J
H
Snap top cover (J) onto upright (H).
9
1/8"
fig. 9
DETAIL 3
L
A
DETAIL 2
N
H