Filter
Top Products
11 of 11
ISSUED: 09-05-06 SHEET #: 202-9166-7 11-10-08
10
Attaching Screen with VESA 100 Mounting Pattern
• If screws don't get three complete turns in the screen inserts or if screws bottom out and hook plate is still not tightly
secured, damage may occur to screen or product may fail.
WARNING
Choose hole pattern as shown in figure 10. Attach
hook plate (B) to back of screen using four M4 x 12
mm screws. Tighten screws using a phillips screw-
driver.
M4 X 12 MM SCREWS
fig 10
Attach hook plate (B) to screen mount bracket (A).
B
A
11
12
Insert two 1/4-20 x 12 mm screws (L) into holes indicated below for desired screen orientation. Tighten all screws
using 4 mm allen wrench (R).
L
L
L
2° Backward Tilt 5° Forward TiltNo Tilt
B
© 2007, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.