Filter
Top Products
5 of 11
ISSUED: 09-05-06 SHEET #: 202-9166-7 11-10-08
Insert three button bumpers (K) into bottom of shelf
clamp bracket (D).
Attach shelf clamp bracket (D) to shelf support (C)
using two 1/4-20 x 20 mm screws (M) and two
1/4-20 nuts (N).
For second shelf installation, repeat steps 2
through 5-1.
Insert six button bumpers (K) into shelf support (C).
Place glass shelf (I) on shelf support.
2
Loosely attach four 1/4-20 x 12 mm screws (L),
washers (O), and 1/4-20 nuts (N) to shelf
support (C).
L
O
C
N
Slide shelf support (C) onto upright (H) so that 1/4-20
nuts (N) slide into slots of upright (H) as shown in figure
3 and detail 1. Slide shelf support to desired position,
level, then tighten 1/4-20 x 12 mm screws (L) using
4 mm allen wrench (R).
C
H
SLOT
fig. 3
3
I
K
C
4
5-1
K
N
D
M
C
5
5-2
NOTE: MAXIMUM OF TWO SHELVES
Max height of top shelf is 34" from base.
Max height of second shelf is 28" from base.
N
H
DETAIL 1
L
3-1