Filter
Top Products
21
The display will flash.
OK
neck/shoulder
back
lower back
lower body
self program time input
self program
time
(1) Set the time for each area of the body.
• The time will change, as shown below,
according to the number of times pressed.
(2) Press after completing settings for each body area.
• The selected program will be configured to reflect your time settings.
2. Press .
3. Open the cover and input the time settings.
4. Close the cover.
• If the cover is left open, you will be unable to use the Leg Stretch OFF/ON, Program Strength or Focus buttons
during the massage.
OK
From this point on the instructions for operation are the same as those for those once a massage
program is selected, as covered starting from step 2 of page 16.
Strength adjustment, on/off switching of leg stretch function are performed in the same way. (See
Page 18)
• The duration of a massage in the self program mode is approximately 15 minutes.
• Body scanning is not performed when all time settings for the upper body are set to zero.
• If time settings for the lower body are set to zero, the massage will commence with leg stretch function set to off.
This function may be turned on by pressing the Leg Stretch OFF/ON button.