Filter
Top Products
10
12
Bottom
Tabs
Top Tabs
Notches
Attaching the Control Panel Stand Covers (On Both Right and Left Sides)
Attaching the Pillow
The method of attaching the covers is the same
for both sides.
• Diagram shows side attached with control
panel stand.
1. Insert the bottom tabs on the cover
into the notches on the armrest.
2. Insert the top tabs on the cover
into the notches on the armrest.
Use the pillow fasteners to attach the
pillow.
Cover for Side WITH Control Panel Stand Cover for Side WITHOUT Control Panel Stand
(1) Insert the head of a flat-tip screwdriver
between the top tabs of the cover.
• Performing this procedure with the Allen key
or a cross-point screwdriver could damage the
unit.
(2) Pull out the top tabs of the cover (two places)
using the flat-tip screwdriver.
(3) Pull up on the cover at an angle.
When Removing the Control Panel Stand Covers
(1) (2) (3)