Filter
Top Products
22
Attachment Screw
(M6#16)
Allen Key
9
Attachment Screw
(M6#10)
Allen Key
11
Use This Screw
#6
Use This Screw
#4
ASSEMBLY
Attaching the Armrests (On Both Right and Left Sides)
Attaching the Control Panel Stand to the Right or Left Armrest
1. Insert the armrest into the unit.
• Markings indicating left-hand and right-hand
sides can be found on the inside surface of
each armrest.
• Make sure the control panel cord does not
become pinched when fitting the right armrest
onto the unit.
2. Fasten the armrest with the
attachment screws.
• Set the three attachment screws in place first
and then tighten them firmly.
1. Decide which side to attach the
control panel stand to.
2. Fasten the control panel stand with
the attachment screws in four places.
• Set the four attachment screws in place first
and then tighten them firmly.
Use the mark as
a guide for insertion.
• Diagram shows attachment to right armrest.
Turn screws clockwise
to tighten.
1
2