Filter
Top Products
9
REPLACEMENT OF MAIN PARTS
IMPORTANT: Before replacing any part always
DISCONNECT THE CLEANER FROM THE
ELECTRICITY SUPPLY.
• MOTOR / CARBON BRUSHES
(1) Motor
1. To remove the dust cover first pull it out from one side and
then rotate it up wards to take it out. (Fig.1)
2. Remove cord reel and switch pedal prying out as indicated
with a flat-head screwdriver. (Fig. 2)
NOTE: When prying out take care not to damage the body.
Fig. 2
Fig. 1
Dust cover
Cord reel Pedal
Switch
Pedal
Flat-head
screwdriver