Filter
Top Products
37
Erasing saved data
1
Press the button to turn on the power.
The power will turn off automatically if the massage does not start within 3 minutes after turning on the power.
2
Press the button corresponding to the settings you wish to delete.
Only the button pressed will illuminate.
3
Confirm the program selection buttons flash.
4
Press the same button again and hold for 3 or more seconds.
The pressed button will flash.
5
Press the button once again while it is flashing (for approximately 15 seconds).
The change from flashing to steady indicates that the deletion is complete.
•
EP30003.indb 37 2007/07/19 13:05:30