Filter
Top Products
34
Adjusting the control panel stand and pillow
Adjusting the control panel stand
The direction of the pivoting stand can be adjusted.
Front/Back
Left/Right
Ball joint
Adjusting the pillow for correct height during a massage
1. Remove the pillow. 2. Adjust the height of the pillow so that the
bottom edge is at ear level.
3. Attach the pillow on the velcro
fasteners.
Pillow
If positioned too low, the pillow may
interfere with a massage of the area
around the neck.
Lower edge
of the pillow
Ear level
When the reclining angle changes, the
position of the pillow may shift. In that
case, adjust the position again.
•
•
Pillow
Velcro
fasteners
EP30003.indb 34 2007/07/19 13:05:27