Filter
Top Products
231
EX-10
12 to 24 V DCע10 % Ripple P-P 10 % or less
<NPN output type>
NPN open-collector transistor
• Maximum sink current: 50 mA
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage:1 V or less (at 50 mA sink current)
0.4 V or less (at 16 mA sink current)
<PNP output type>
PNP open-collector transistor
• Maximum source current: 50 mA
• Applied voltage: 30 V DC or less (between output and
םV)
• Residual voltage:1 V or less (at 50 mA source current)
0.4 V or less (at 16 mA source current)
DC-12 or DC-13
Incorporated
0.5 ms or less
Red LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or
stable dark condition)
3 (Industrial environment)
IP67 (IEC)
מ25 toם55 ЊC מ13 toם131 ЊF (No dew condensation or icing allowed), Storage:מ30 toם70 ЊC מ22 toם158 ЊF
35 to 85 % RH, Storage: 35 to 85 % RH
Sunlight: 10,000 ?x at the light-receiving face, Incandescent light: 3,000 ?x at the light-receiving face
EN 50081-2, EN 50082-2, EN 60947-5-2
1,000 V AC for one min.between all supply terminals connected together and enclosure
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each
500 m/s
2
acceleration (50 G approx.) in X, Y and Z directions for three times each
Red LED (modulated)
Enclosure: Polyethylene terephthalate
Lens: Polyalylate
0.1 mm
2
3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Extension up to total 50 m 164.042 ft is possible with 0.3 mm
2
, or more, cable
(thru-beam type: emitter and receiver).
Thru-beam
Thru-beam • with operation mode switch on bifurcation
Front sensing Side sensing Front sensing Side sensing Front sensing Front sensing Front sensing Side sensing Front sensing Side sensing
EX-11A(-PN) EX-11EA(-PN) EX-13A(-PN) EX-13EA(-PN) EX-19A(-PN) EX-14A(-PN)
EX-15 EX-15E EX-17 EX-17E
EX-11B(-PN) EX-11EB(-PN) EX-13B(-PN) EX-13EB(-PN) EX-19B(-PN) EX-14B(-PN)
(Note 2) (Note 2) (Note 2) (Note 2)
NPN open-collector transistor
• Maximum sink current: 100 mA
• Applied voltage: 30 V DC or less
(between output and 0 V)
• Residual voltage: 1.5 V or less
(at 100 mA sink current)
• Residual voltage: 0.4 V or less
(at 16 mA sink current)
"0.1 mm "0.004 in
copper wire
Setting distance:
10 mm 0.394 in
"2 mm "0.079 in
opaque object
Setting distance between
emitter and receiver:
1 m 3.281 ft
Type
Light-ON
Item Dark-ON
Sensing range
Min. sensing object
Hysteresis
Repeatability
(perpendicular to sensing axis)
Supply voltage
Current consumption
Output
Utilization category
Short-circuit protection
Response time
Operation indicator
Incident beam indicator
Stability indicator
Pollution degree
Protection
Ambient temperature
Ambient humidity
Ambient illuminance
EMC
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
Emitting element
Material
Cable (Note 4)
Cable extension
Weight
Accessories
SPECIFICATIONS
Model
No.
(Note 1)
150 mm 5.906 in
"1 mm "0.039 in opaque object
Setting distance between
emitter and receiver:
150 mm 5.906 in
500 mm 19.685 in 1 m 3.281 ft
2 to 25 mm 0.079 to
0.984 in (Note 3)
(Conv. point: 10 mm 0.394 in)
15 % or less of
operation distance
0.1 mm 0.004 in
or less
Convergent reflective
(Diffused beam type)
0.05 mm 0.002 in or less0.05 mm 0.002 in or less
Orange LED (lights up when the output is ON),
located on the bifurcation
Red LED (lights up under light received condition),
located on the receiver
Green LED (lights up under stable light received condition
or stable dark condition), located on the receiver
20 mA or less
30 mA or lessEmitter: 10 mA or less, Receiver: 15 mA or less
150 mm 5.906 in 500 mm 19.685 in
()
"2 mm "0.079 in opaque object
Setting distance between
emitter and receiver:
500 mm 19.685 in
()
"1 mm "0.039 in opaque object
Setting distance between
emitter and receiver:
150 mm 5.906 in
()
"2 mm "0.079 in opaque object
Setting distance between
emitter and receiver:
500 mm 19.685 in
()
()
Mounting screws: 1 set
Mounting screws:
1 set
Emitter: 20 g approx., Receiver: 20 g approx.
Enclosure: Polyethylene terephthalate
Lens: Polyalylate, Bifurcation: Polyalylate
0.2 mm
2
3-core cabtyre cable, 2 m 6.562 ft long (beyond bifur-
cation; from emitter / receiver to bifurcation: 0.5 m 1.640 ft long)
Extension up to total 100 m 328.084 ft is
possible with 0.3 mm
2
, or more, cable.
Mounting screws: 1 set, Adjusting screwdriver: 1 pc.
55 g approx.
20 g approx.
Notes: 1) Model Nos. having the suffix ‘-PN’ are PNP output type.
Notes: 2) Either Light-ON or Dark-ON can be selected by the operation mode switch (located on the bifurcation).
Notes: 3) The sensing range of convergent reflective type sensor is specified for white non-glossy paper (50
ן50 mm 1.969ן1.969 in) as the object.
Notes: 4)
The flexible cable type (model Nos. having suffix
‘
-R
’
) has a 0.1 mm
2
3-core (thru-beam type emitter : 2-core) flexible cabtyre cable, 2 m 6.562 ft long.
Environmental resistance
()
08/2005