Filter
Top Products
230
EX-10
Slit on both sides
⅐
Sensing range: 500 mm 19.685 in [EX-19Ⅺ]
300 mm 11.811 in [EX-13Ⅺ]
⅐ Min. sensing object:
"
1.5 mm
"
0.059 in
Designation Model No. Description
Mounting bracket for the front sensing type sensor [Cold rolled carbon steel (SPCC)]
(The thru-beam type sensor needs two brackets.)
Mounting bracket for the side sensing type sensor [Cold rolled carbon steel (SPCC)]
(The thru-beam type sensor needs two brackets.)
L-shaped mounting bracket sensor [Cold rolled carbon steel (SPCC)]
(The thru-beam type sensor needs two brackets.)
Mounting bracket for the front sensing type sensor [Stainless steel (SUS304)]
(The thru-beam type sensor needs two brackets.)
Mounting bracket for the side sensing type sensor [Stainless steel (SUS304)]
(The thru-beam type sensor needs two brackets.)
L-shaped mounting bracket [Stainless steel (SUS304)]
(The thru-beam type sensor needs two brackets.)
Slit on one side
⅐
Sensing range: 600 mm 23.622 in [EX-19Ⅺ]
250 mm 9.843 in [EX-13Ⅺ, EX-17]
⅐ Min. sensing object:
"
2 mm
"
0.079 in
Slit on both sides
⅐
Sensing range: 400 mm 15.748 in [EX-19Ⅺ]
200 mm 7.874 in [EX-13Ⅺ, EX-17]
⅐ Min. sensing object:
"
1.2 mm
"
0.047 in
Slit on one side
⅐
Sensing range: 800 mm 31.496 in [EX-19Ⅺ]
350 mm 13.780 in [EX-13Ⅺ]
⅐
Min. sensing object:
"
2 mm
"
0.079 in
Slit on one side
⅐
Sensing range: 250 mm 9.843 in [EX-13EⅪ, EX-17E]
⅐
Min. sensing object:
"
2 mm
"
0.079 in
Slit on both sides
⅐
Sensing range: 200 mm 7.874 in [EX-13EⅪ, EX-17E]
⅐
Min. sensing object:
"
1.2 mm
"
0.047 in
Mounting screws with washers (50 pcs. lot).It can mount
securely as it is spring washer attached.
Sensor
mounting
bracket
Slit mask
Mounting screw
MS-EX10-1
MS-EX10-2
MS-EX10-3
MS-EX10-11
MS-EX10-12
MS-EX10-13
OS-EX10-12
(Slit size
"
1.2 mm
"
0.047 in)
OS-EX10-15
(Slit size
"
1.5 mm
"
0.059 in)
OS-EX10E-12
(Slit size
"
1.2 mm
"
0.047 in)
CHX-SC2
MS-M2
Sensor checker
(Note)
It is useful for beam alignment of thru-beam type sensors.
The optimum receiver position is given by indicators, as
well as an audio signal.
OPTIONS
Sensor mounting bracket
• MS-EX10-1 • MS-EX10-11
• MS-EX10-2 • MS-EX10-12
• MS-EX10-3 • MS-EX10-13
Slit mask
• OS-EX10-12 • OS-EX10E-12
• OS-EX10-15
Example of mounting
(OS-EX10E-12)
Tighten along with the sensor
mounting bracket.
Sensor checker
• CHX-SC2
LEVEL
POWER
CHX-SC2
Sensor checker
Material: Cold rolled carbon
steel (SPCC)
(Uni-chrome plated)
Two M2 (length 4 mm 0.157 in)
pan head screws are attached.
Material: Stainless steel (SUS304)
Two M2 (length 4 mm 0.157 in)
pan head screws [stainless steel
(SUS304)] are attached.
Material: Cold rolled carbon
steel (SPCC)
(Uni-chrome plated)
Two M2 (length 8 mm 0.315 in)
pan head screws are attached.
Material: Stainless steel (SUS304)
Two M2 (length 8 mm 0.315 in)
pan head screws [stainless steel
(SUS304)] are attached.
Material: Cold rolled carbon
steel (SPCC)
(Uni-chrome plated)
Two M2 (length 4 mm 0.157 in)
pan head screws, and two
M2 (length 8 mm 0.315 in)
pan head screws are attached.
Material: Stainless steel (SUS304)
Two M2 (length 4 mm 0.157 in)
pan head screws [stainless steel
(SUS304)] and two M2 (length
8 mm 0.315 in) pan head screws
[stainless steel (SUS304)] are
attached.
08/2005