Filter
Top Products
92
Notes on Windows Vista
®
/ Windows
®
7
(continued)
Symptom 2
Easy IP Setup Software does not display the detected IP address.
Solution
Check the firewall settings. If firewall is activated, add the web browser or Easy IP Setup Software to the [Exceptions] tab on
the “Windows Firewall Settings” menu.
Open the control panel, and click “Security”.
Click “Allow a program through Windows Firewall” of “Windows Firewall”. (Refer to the screenshot.)
Click the [Continue] button on the “User Account Control” window.
Click the [Exceptions] tab on the “Windows Firewall Settings” windows.
Check “Internet Explorer” or “easyipsetup.exe”. (Refer to the screenshot.)
Click the [OK] button.
Symptom 3
When starting the Easy IP Setup Software, a message is displayed to request the password of administrator.
When exiting the Easy IP Setup Software, the message “This program might not have installed correctly” is displayed.
Solution
Turn off User Account Control (UAC) from the control panel of Windows Vista.
Open the control panel, and click “User Accounts”.
Select “User Accounts” from “User Accounts”.
Click “Turn User Account Control On or Off”.
Click the [Continue] button on the “User Account Control”
window.
Uncheck “Use User Account Control (UAC) to help protect your
computer”. (Refer to the screenshot.)
Click the [OK] button.