Filter
Top Products
52
Setting the camera menu items
(continued)
IP Network screen
IP Network
IP Address
192.168. 0. 10
Subnet Mask
255.255.255. 0
Default Gateway
192.168. 0. 1
Return
IP Address
This is selected to display the IP address which has been
set for the unit.
Subnet Mask
This is selected to display the subnet mask address which
has been set for the unit.
Default Gateway
This is selected to display the default gateway which has
been set for the unit.
On this screen, the IP Address, Subnet Mask and
Default Gateway settings can be displayed but they
cannot be changed.
To change an address, use “Network” (page 78) on
the Web setting screen or “Easy IP Setup Software”
(page 40 in the <Basics>).
Note
Concerning initialization
When “ Initialize” is selected on the Maintenance screen, the
Initialize screen appears.
Initialize screen
Initialize
Do you want to initialize
Menu settings?
CANCEL
O.K.
When the cursor is moved to “O.K.” on the Initialize
screen and the setting is entered, the Menu settings
initialize screen is displayed for 5 seconds, and the
camera settings are restored to the settings which were
established when the camera was purchased.
However, the Format settings and Frequency settings
(see page 46) and network settings are not initialized.
When the initialization operation is completed, the Top
Menu screen is restored to the display.
Menu settings initialized screen
Menu settings
initialized
When the cursor is moved to “CANCEL” on the
Initialize screen and the setting is entered, the Menu
settings unchanged screen is displayed for 5 seconds,
the initialization operation is not performed, and the
Maintenance screen returns to the display.
Menu settings unchanged screen
Menu settings
unchanged