Filter
Top Products
Page 34 of 40
The following Menu Items operate on the entire Instrument.
There is no Set Point distinction. These items will appear in
both the
Edit1Edit1
Edit1Edit1
Edit1,
Edit2Edit2
Edit2Edit2
Edit2, and
Edit3Edit3
Edit3Edit3
Edit3 menus.
SP1oSP1o
SP1oSP1o
SP1o Set Point 1 Output Select: Select
OutAOutA
OutAOutA
OutA or
OutbOutb
OutbOutb
Outb.
OutAOutA
OutAOutA
OutA Set Point 1 is routed through Output A, Set Point 2 is
routed through Output B.
OutbOutb
OutbOutb
Outb Set Point 1 is routed through Output B, Set Point 2 is
routed through Output A.
COPYCOPY
COPYCOPY
COPY
Copy Zone Parameters. Copies program parameters from one
zone to the other.
nonenone
nonenone
none No copy function is performed. Factory default.
1to21to2
1to21to2
1to2 Copies all parameters from Zone 1 to Zone 2.
2to12to1
2to12to1
2to1 Copies all parameters from Zone 2 to Zone 1.
AddrAddr
AddrAddr
Addr
(Option C4, Serial Communications) Control Address: Select
from
11
11
1
t o
3FE3FE
3FE3FE
3FE
. This number (hexadecimal, base 16) must match
the address number used by the host computer. The value
displayed is for Zone 1. The address for Zone 2 is the value
for Zone 1 plus one (e.g. if
Addr
is set to
17
, Zone 1 is
assigned to address
17
and Zone 2 is assigned to address
18
). Addresses
100
,
200
, and
300
are reserved for Factory
use.
bAUdbAUd
bAUdbAUd
bAUd
(Option C4, Serial Communications) Communication Baud
Rate: Select
300300
300300
300
,
12001200
12001200
1200
,
24002400
24002400
2400
,
48004800
48004800
4800
,
96009600
96009600
9600
, or
192192
192192
192
00. This
number must match the baud rate used by the host computer.
nAtnAt
nAtnAt
nAt
(Option C4, Serial Communications) No Activity Timer:
Set from
OFFOFF
OFFOFF
OFF
or
11
11
1
to
9999
9999
99
minutes.
11
11
1
-
9999
9999
99
Maximum time between host computer accesses.
If timer counts to 0,
CHEC LorE
will be displayed.
OFFOFF
OFFOFF
OFF
No Activity Timer function is disabled.